media

Matters needing attention for aerial work lifting platform

Update:06-05-2020
Abst:

Matters needing attention for aerial work lifting platf […]

Matters needing attention for aerial work lifting platform

1. The lift platform should generally raise the lower arm first, then the middle arm, and finally the upper arm. During the swinging operation of the lifting platform, the lower arm must be raised after a certain height, and the rotation should be slow. At the same time, pay attention to whether the distance between the shearing arm and the platform to each equipment meets the safety needs.
2. The signal sent must be clear and accurate. Before working on the lifting platform, the person in charge of the work should make technical and relevant safety briefings to the operator, and the content should include safety precautions and danger points.


3. The operators on the working platform should strictly wear safety belts, when working in the live area, the car body should be grounded according to the regulations, and the ascending operation of the lifting platform should be directed by the person in charge of the work, and the person in charge should follow the signals specified in GB5082 Keep in touch with the operator of the lifting platform.
4. The division of labor and scope of responsibilities. In addition to checking the vehicle condition and the operator, the person in charge of the work is also responsible for checking the terrain environment, whether the landing and landing meet the requirements of the safety technical measures or the work plan formulated in advance. If there are discrepancies, corresponding measures should be worked out before start working.